We are a company made up of professionals and avid DIYers in different fields of the car/electronics/customizing/fabrication/audio profession that have put together products that we wish were available to us in the market to make our lives easier. Decades of experience and improvisation at the installer end of the work chain have led us to develop products that help elevate industry standards to a safe, professional, and world class level. These products were conceptualized in the workshop, and not in the board room.
Items can be picked up at our office: No. 11 Admirable Lane, Sanville, Baranggay Culiat 1128, Quezon City. We are near Visayas Avenue, Congressional, Tandang Sora area.
Our regular office hours are 9am to 5pm, Monday to Saturday. Outside of those times, simply send us a message or call us before picking up. We are happy to accommodate customers any time, even on Sundays or Holidays.
Yes, we ship nationwide. Courier charges will apply to buyer’s account and will be added on to your orders. We do not charge any handling fees. We also combine shipping.
Usually 1 to 3 days for Metro Manila and 1 to 4 days for provincial.
Usually 1 to 3 days for Metro Manila and 1 to 4 days for provincial.
Payments can be made thru bank deposit at BPI or BDO. We also accept money transfer thru Cebuana Lhullier, LBC and Palawan Express.
Sorry, but our partner couriers do not accept C.O.D. facilities.
Our Buzzkill Supreme is considered a deadening (mass loading) and dampening (absorption/decoupling) product. All other products we categorize as dampening. Buzzkill Supreme uses a butyl based adhesive while all the others use a pressure activated, non butyl based adhesive.
We have predetermined packages listed on the Buzzkill page depending on what vehicle you want treated. These packages are a good starting off point and can be used as a guide for your soundproofing project.
We are purely a sales office. All of our products are fairly easy to install (DIY) with a little bit of elbow grease, but otherwise, your friendly neighborhood car customizer should be able to manage. Our prices take that into consideration.
Yes, our minimum is 5 meters per size.
You can use Cable Control electrical tape to terminate the ends, or you can also use Cable Control’s heat shrink tubing.
The small cable markers fit LAN/ Cat5 cables.
Our fleece tape was designed to be used in-vehicle and was not designed for engine bay/outdoor use.
Our colored heat shrink tubing comes pre-packed and pre-cut in equal amounts of yellow and black only.
Experience has taught us that butt connectors are often difficult to crimp in a tight situation and tend to disconnect when the wire is inadvertently pulled.
The tinned copper part is the side that needs to be crimped/soldered.
No, these are not designed to be waterproof and should be properly sealed with electrical tape
No, EZ Taps are designed to automatically strip your wire. Simply thread the wires through and crimp with pliers.
No, we’ve learned over time that those are difficult to remove without damage when servicing and some of the removable caps tend to get lost.
Kindly measure the diameter of the hole to be filled. Gapcaps are available in ½” and ¾”.
Yes, when mounted from the backside of your baffle, the threaded inserts will work as a T-nut.
No, our battery terminals are specified to fit only batteries with standard sized poles.
The third lead (memory backup) is taken care of by the built-in self-recharging battery contained within the clock, and that holds the time and date memory data.
Sorry but no. The DIY Aux Input serves merely as an extension to pre-existing USB audio functions on your head unit.
There are many varying hole sizes for all the different vehicles in the market today. Kindly measure based on the switch dimensions we provide on the OEM Engineering Switch Cluster page.
Yes, our switches and power cluster devices are designed to work on both 12volt and 24volt power supplies automatically.